Call back
Oil separator
The Bioprocessor's oil separator is designed to purify wastewater from oil products and suspended solids, as well as to retain gravel, sand, and debris. Such separators are used in car washes, industrial enterprises, and catering establishments. Larger production facilities may require larger units. They can be installed both underground and on the ground, including on lawns and carriageways.
For gas stations
For Car Wash and Service Station
For logistics centers
How it works
The oil separator operates on the principles of separation and gravity. Solid particles settle in the tank, and oils and refined products rise to the top as the waste stream slows down. Afterward, the liquid passes through an absorbent filter for high-efficiency separation, followed by a fine filter for final separation. It has polypropylene fibers that hold oil-containing particles.
Advantages of oil separator
Environmentally friendly
Cost-effectiveness
Accessibility
Reliability
Durability
Design
Standard models of oil separators purify wastewater from oil products. Often used at car washes and petrol stations
from 1500€
Standard
BIOPROCESSOR - GS
Standard models of oil separators purify wastewater from oil products. Often used at car washes and petrol stations
from 6000€
Industrial
BIOPROCESSOR - GS
Highly efficient wastewater treatment from oil products and suspended solids can be provided by industrial models of oil separators, such as those provided by the Bioprocessor TM. They are used in various industries, such as oil refining, chemical and pharmaceutical industries, food production, municipal water supply, and wastewater treatment.
Service
The process of maintaining the oil traps is quite straightforward and can be a time-saving measure.
You only need to clean the filtration element periodically. The filter is cleaned of oil products once a quarter. The strainer is washed thoroughly with fresh water. Depending on the capacity of the separator's storage tank, the oil products are removed manually.
Gallery
Oil separator
Oil separators (also known as oil traps) are a crucial component of the wastewater treatment process, facilitating the purification of wastewater from oil products and suspended solids. These devices contribute to reducing the environmental impact of industry and preventing the negative consequences that can arise when contaminated water is released into the environment.
Bioprocessor TM is one of the leading manufacturers of oil separators on the market. Their products offer a multi-stage wastewater treatment system that allows you to achieve a high level of liquid purity before it is released into the environment. This is important not only in terms of meeting environmental standards, but also for the efficiency of further water treatment..
The Bioprocessor TM oil separator consists of several block sections that are combined into a single module. Each unit has its own function and can separate different types of contaminants that may be present in wastewater. Gravity and separation are the basic principles of the oil separator. The water flow slows down, solid particles settle, and then oils and other oil products ascend to the upper layers. The Bioprocessor TM oil trap is equipped with an absorbent filter and fine filters, which help achieve an even higher level of water purification.
FAQ
What is an oil separator (oil trap), and what is it for?
Oil traps (oil and sand separators) are devices that remove oil products from technical water or rainwater that pose a risk of contamination of groundwater and the environment.
Where are oil separators used?
Petrol stations, car repair shops, car washes, car parks, airports, logistics centres.
What is the efficiency of oil separators?
Suspended solids – 10-12 mg/l, oil products – 0.3 mg/l
What material are the oil separators made of?
Bioprocessor oil separators are made of high strength and quality polypropylene sheet. They are completely non-volatile, hermetically sealed and guarantee a high level of wastewater treatment from suspended solids and solid particles.
What are the components of an oil separator?
They are constructed as a single module, within which several sectional units are positioned. They ensure that the contaminated liquid is treated up to a point where it can be discharged into the earth, ponds, and centralized sewage systems. The separators are completely non-volatile, so there are no movable or electrical components.
How is the oil separator maintained?
To maintain the oil separator, it is recommended that the separator be regularly inspected and cleaned of accumulated waste. The frequency and methods of cleaning are dependent on the amount of work required and the characteristics of the wastewater to be treated. It is also necessary to replace the filtration elements and keep all components in good working order. It is also recommended that preventive maintenance and inspections be performed in accordance with the manufacturer's instructions and safety standards.
We are ready to take your order and advise you on the system and its installation
